Pre-filter for pump made entirely of stainless steel 1.4404 (316L) Designed to protect drive/suction pumps from strange objects, dirt and other elements. Assembly on mobile cart for transport. Designed to work at 10 bar(g) pressure and 100 ºC temperature.
Distillation column made entirely of stainless steel 1.4404 (316L) The distillation column is made up of the following elements: 25m3 Tank Column 1400mm in diameter and 14 meters high 62m2 BEM type horizontal condenser Vertical evaporator type BEM of 110 m2 Peripheral equipment of the installation such as condensate collection tanks, safety exchangers, etc. Column …
DISTILLATION COLUMN IN STAINLESS STEEL 1.4404 (316L) Read More »
Centrifuge for pilot plant made of stainless steel 1.4404 (316L).
Centrifuge for laboratory made entirely of stainless steel 1.4404 (316L)
FT-12 type process centrifuge mounted on an inertia plate. Centrifuge body in stainless steel 1.4404 Centrifuge basket in HASTELLOY C-22
Vacuum dryer for drying products in vacuum conditions made of stainless steel 1.4404 ( 316L) Inside the dryer there are 12 heated trays made of stainless steel 1.4404 (316L) through which a heating fluid circulates inside. It has a curved hinged door with peepholes and insulated to avoid condensation. There are 2 peepholes on the …
Process equipment made entirely of stainless steel 1.4404 (316L) This equipment consists of a 3,000 liter reactor with a heating jacket designed and legalized to work at -1 / 3 bar (g) and a temperature of 150 ºC. The upper bottom is raised by means of a hydraulic system with the possibility of rotating the …
Additive preparation table with 200-liter stirred tank with stirring system made entirely of 1.4404 (316L) stainless steel Designed for the preparation of additives and pre-mixing before adding them to the process. Mixing by height adjustable stirring system. It incorporates a weighing system and programming via PLC
Mobile cart for product transfer made entirely of stainless steel 1.4404 (316L) It has an anchor-type agitation system to avoid caking of the product. Incorporates lump breaker / lump breaker. Provided with a rotary valve for pneumatic transport.
Horizontal tubular exchanger type BEM with 65m2 of exchange surface made entirely of stainless steel 1.4404 (316L) The Body Side (LC) is designed and legalized to work at a pressure of -1 / 3 bar (g) and a temperature of 300 ºC The tube side (LT) is designed and legalized to work at a pressure …
TUBULAR EXCHANGER TYPE BEM 65m2 IN STAINLESS STEEL 1.4404 (316L) Read More »
